How To Refinish Your Solid Brass Hardware – All About Doors and Windows A Necessary Part of Your Door & Window Repairs!» Door and Window Parts » Doors and Their Hardware » How To Refinish Your Solid Brass Hardware How To Refinish Your Solid Brass Hardware

Brass hardware is designed to complement the design of your door or window—to cast reflections from its polished finish and to provide years of service.

Brass, an alloy of copper and zinc, is polished and sealed with a clear coating by the manufacturer. When polished brass is not protected, it will tarnish and oxidize. This oxidization is a natural process that occurs when the elements contact the unprotected brass.

The coating that is applied by the manufacturer to the brass hardware may be subject to a degree of damage due to everyday use. This could be caused by normal scraping of rings or house keys on the handle during daily use or the transfer of paint thinners, lotions and other reactive foreign products from hands or nearby projects on the door or walls. In addition, ammonia-based cleaners will also deteriorate the protective coating. If normal wear-and-tear, sea spray or deterioration breaks through the coating, the exposed brass will oxidize.

Brass has an enduring quality and can be refurbished to its original polished finish over and over. The process is relatively easy.

Guide to Refinishing Your Brass HardwareRemove the hardware from the door so the finish of the door will not be affected.On a newspaper-covered surface, brush the handles and plates with lacquer remover.After the coating is loosened, use grade 0000 steel wool to remove the coating and to polish the brass surface.Rinse the lacquer remover from the brass with a mild soap solution.Apply a high quality, non abrasive, polymer-base automobile wax to seal the surface. Alternatively, you can apply a spray lacquer, but this is more likely to flake off down the road. Though waxing requires continuous care, spray lacquer tends to be a bigger mess to clean up later.Re-install the hardware on the door.Periodically hereafter, the door hardware can be buffed with grade 0000 steel wool and waxed in its installed position.If your solid brass hardware is PVD Brass, it is considered lifetime-quality and should not need to be refinished for at least 10 years. However, it is always a good idea to clean and polish your regular and PVD brass hardware. For instructions on how to clean your brass and PVD brass, read our guide here.

Click below to download your own printable guide from All About Doors & Windows to help you refinish your brass hardware.

How to Refinish Brass Hardware

Parts Manufacturers Please SelectAcmeAndersen Window..ArcadiaAtriumBaldwinCoxFercoFuhrG-UGenericHoppeKellerLarsonMarksMilgardPadoPapaizPeachtreePellaRotoSchlegelTruth HardwareWartian Parts Categories Atrium Door & Window Hardware Basement Replacement Windows Andersen Window & Door Parts Peachtree Window and Door Parts Pella Window & Door Parts Hinged Door Parts & Builder Hardware Window Parts & Hardware Closet Door Hardware & Parts Sliding Glass Door Hardware Storm / Security Door Hardware Shower Door & Tub Parts Sliding Screen Door Hardware Multipoint Lock Handleset Trim Multipoint Locks Garage Door Hardware & Parts Commercial Door Hardware Locks, Deadbolts, & Handlesets Weatherstripping, Door & Window Drawer and Cabinet Hardware Glass Inserts, Entry Door RV and Mobile Home Hardware Custom Window Sashes Clearance, Overstock, Liquidation and Blemished Items Information

More Info
Shipping & ReturnsPrivacy NoticeConditions of UseContact UsLinksKansas City Links Installation Help

Having trouble installing your parts? Are you a window or door expert that wouldn’t mind some free promotion?